Digisol DG-FS4526E, Management Manual

Page: 86 / 1162

C
HAPTER
3 | Using the Web Interface
Navigating the Web Browser Interface
– 86 –
M
AIN
M
ENU
Using the onboard web agent, you can define system parameters, manage
and control the switch, and all its ports, or monitor network conditions. The
following table briefly describes the selections available from this program.
Table 6: Switch Main Menu
Menu Description Page
System
General Provides basic system description, including contact information 101
Switch Shows the number of ports, hardware version, power status, and
firmware version numbers
102
IP Sets IPv4 address for management interface and gateway 489
Configure Global Sets IP address of the gateway router between this device and
management stations that exist on other network segments 489
Configure Interface Configures IP address for management access 490
Add Sets the IPv4 address for management access 490
Show Shows the IPv4 address for management access 490
Capability Enables support for jumbo frames;
shows the bridge extension parameters
104 ,
105
File 106
Copy Allows the transfer and copying files 106
Set Startup Sets the startup file 109
Show Shows the files stored in flash memory; allows deletion of files 110
Automatic Operation Code Upgrade Automatically upgrades operation code if a newer version is
found on the server 111
Time 115
Configure General
Manual Manually sets the current time 115
SNTP Configures SNTP polling interval 116
Configure Time Server Configures a list of SNTP servers 117
Configure Time Zone Sets the local time zone for the system clock 118
Console Sets console port connection parameters 119
Telnet Sets Telnet connection parameters 121
CPU Utilization Displays information on CPU utilization 122
Memory Status Shows memory utilization parameters 123
Reset Restarts the switch immediately, at a specified time, after a
specified delay, or at a periodic interval
124
Interface 129
Port 129
General
Configure by Port List Configures connection settings per port 129
Configure by Port Range Configures connection settings for a range of ports 132
Show Information Displays port connection status 133