Digi AnywhereUSB Plus, User Manual, Page: 81 / 815

Configuration and management Change the default password for the admin user
AnywhereUSB® Plus User Guide 81
Other default configuration settings
Feature Configuration
Central
management n
Digi Remote Manager enabled as the central management service.
Security policies n
Packet filtering allows all outbound traffic.
n
SSH and web administration:
l
Enabled for local administration
l
Firewall zone: Set up
Monitoring n
Device heath metrics uploaded to Digi Remote Manager at 60 minute
interval.
n
SNMP: Disabled
Change the default password for the admin user
The unique, factory-assigned password for the default admin user account is printed on the bottom
label of the device and on the loose label included in the package.
If you erase the device configuration or reset the device to factory defaults, the password for the
admin user will revert to the original, factory-assigned default password.
É
WebUI
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Click Authentication > Users > admin .
4. Enter a new password for the admin user. The password must be at least eight characters long
and must contain at least one uppercase letter, one lowercase letter, one number, and one
special character.