Digi AnywhereUSB Plus, User Manual, Page: 471 / 815

Diagnostics View system and event logs
AnywhereUSB® Plus User Guide 471
5. Click to download the system log.
Command line
1. Log into the AnywhereUSB Plus command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. Use show log at the Admin CLI prompt:
> show log
Timestamp Message
-------------- ---------------------------------------------------------
----
Nov 26 21:54:34
AnywhereUSB Plus netifd: Interface 'interface_wan' is
setting up now
Nov 26 21:54:35
AnywhereUSB Plus firewalld[621]: reloading status
...
>
3. (Optional) Use the show log number num command to limit the number of lines that are
displayed. For example, to limit the log to the most recent ten lines:
> show log number 10
Timestamp Message
-------------- ---------------------------------------------------------
----
Nov 26 21:54:34
AnywhereUSB Plus netifd: Interface 'interface_wan' is
setting up now
Nov 26 21:54:35
AnywhereUSB Plus firewalld[621]: reloading status
...
>
4. (Optional) Use the show log filter value command to limit the number of lines that are
displayed. Allowed values are critical , warning , info , and debug . For example, to limit the
event list to only info messages:
> show log filter info
Timestamp Type Category Message
---------------- ------- --------- --------------------------------------
-----
Nov 26 22:01:26
info user
name=admin~service=cli~state=opened~remote=192.168.1.2
Nov 26 22:01:25
info user
name=admin~service=cli~state=closed~remote=192.168.1.2