
Interfaces
Wide Area Networks (WANs)
AnywhereUSB® Plus User Guide
174
IPv4 Address(es)
: 10.10.10.10/24
IPv4 Gateway
: 10.10.10.1
IPv4 MTU
: 1500
IPv4 Metric
: 1
IPv4 Weight
: 10
IPv4 DNS Server(s)
: 10.10.10.2, 10.10.10.3
IPv6 Status
: up
IPv6 Type
: dhcpv6
IPv6 Address(es)
: fe00:2404::240:f4ff:fe80:120/64
IPv6 Gateway
: ff80::234:f3ff:ff0e:4320
IPv6 MTU
: 1500
IPv6 Metric
: 1
IPv6 Weight
: 10
IPv6 DNS Server(s)
: fd00:244::1, fe80::234:f3f4:fe0e:4320
>
5. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
Delete a WAN or WWAN
Follow this procedure to delete any WANs and WWANs that have been added to the system. You
cannot delete the preconfigured WAN,
ETH1
, or the preconfigured WWAN,
Modem
.
É
WebUI
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
Network
>
Interfaces
.
4. Click the menu icon (
...
) next to the name of the WAN or WWAN to be deleted and select
Delete
.
5. Click
Apply
to save the configuration and apply the change.
Summary of Contents for AnywhereUSB Plus
