Digi AnywhereUSB Plus User Manual Download Page 526

Page: 526 / 815

Routing

IP routing

AnywhereUSB® Plus User Guide

526

WebUI

1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.

2. On the menu, click

System

. Under

Configuration

, click

Device Configuration

The

Configuration

window is displayed.

3. Click

Network

Routes

Routing services

4. Click

Enable

The default firewall zone setting,

Dynamic routes

, is specifically designed to work with routing

services and should be left as the default.

5. Configure the routing services that will be used:

a. Click to expand a routing service.

Enable

the routing service.

c. Complete the configuration of the routing service.

6. Click

Apply

to save the configuration and apply the change.

Command line

1. Log into the AnywhereUSB Plus command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an

Access selection

menu

. Type

admin

to access the Admin CLI.

2. At the command line, type

config

to enter configuration mode:

> config
(config)>

Summary of Contents for AnywhereUSB Plus
















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AnywhereUSB Plus

Reviews:

Digi AnywhereUSB Plus, User Manual, Page: 526 / 815

Search results

Summary of Contents for AnywhereUSB Plus

Reviews: