Digi AnywhereUSB Plus User Manual Download Page 506

Page: 506 / 815

File system

Upload and download files

AnywhereUSB® Plus User Guide

506

2. At the Admin CLI prompt, type:

> rm /opt/temp/
rm: descend into directory '/opt/temp'? yes
rm: remove directory '/opt/temp'? yes
>

3. Type

exit

to exit the Admin CLI.

Depending on your device configuration, you may be presented with an

Access selection

menu

. Type

quit

to disconnect from the device.

Upload and download files

You can download and upload files by using the WebUI or from the command line by using the

scp

Secure Copy command, or by using a utility such as SSH File Transfer Protocol (SFTP) or an SFTP
application like FileZilla.

Upload and download files by using the WebUI

Upload files

1. Log into the AnywhereUSB Plus WebUI as a user with Admin access.

2. On the menu, click

System

. Under

Administration

, click

File System

The

File System

page appears.

3. Highlight the directory to which the file will be uploaded and click to open the directory.

4. Click

(upload).

5. Browse to the location of the file on your local machine. Select the file and click

Open

upload the file.

Summary of Contents for AnywhereUSB Plus
















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AnywhereUSB Plus

Reviews:

Digi AnywhereUSB Plus, User Manual, Page: 506 / 815

Search results

Summary of Contents for AnywhereUSB Plus

Reviews: