Digi AnywhereUSB Plus, User Manual, Page: 342 / 815

User authentication Terminal Access Controller Access-Control System Plus ()
AnywhereUSB® Plus User Guide 342
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Click Authentication > > Servers .
4. Add servers:
a. For Add server , click
g
.
b. For Hostname , type the hostname or IP address of the server.
c. (Optional) Change the default Port setting to the appropriate port. Normally this should be
left at the default setting of port 49.
d. For Secret , type the server's shared secret. This is configured in the key
parameter of the server's tac_plus.conf file, for example:
key = testing123
e. (Optional) Click
g
again to add additional servers.
5. (Optional) Enable Authoritative to prevent other authentication methods from being used if
authentication fails. Other authentication methods will only be used if the
server is unavailable.
6. (Optional) For Group attribute , type the name of the attribute used in the server's
configuration to identify the AnywhereUSB Plus authentication group or groups that the user is
a member of. For example, in
user configuration , the group attribute in the sample
tac_plus.conf file is groupname , which is also the default setting in the AnywhereUSB Plus
configuration.
7. (Optional) For Service , type the value of the service attribute in the the server's
configuration. For example, in user configuration , the value of the service attribute in
the sample tac_plus.conf file is system , which is also the default setting in the AnywhereUSB
Plus configuration.