Digi AnywhereUSB Plus, User Manual, Page: 322 / 815

User authentication Authentication groups
AnywhereUSB® Plus User Guide 322
a. Enable captive portal access rights for users of this group by checking the box next to
Captive portal access .
b. Click Captive portals to expand the Captive portal node.
c. For Add Captive portal , click g .
d. In the Captive portal dropdown, select a captive portal to which users of this group will
have access.
e. Click g again to add additional captive portals.
8. (Optional) Enable users that belong to this group to query the device for Nagios monitoring by
checking the box next to Nagios access .
9. (Optional) Enable users that belong to this group to access the Bluetooth scanning service by
checking the box next to Bluetooth scanner access .
10. Click Apply to save the configuration and apply the change.
Command line
1. Log into the AnywhereUSB Plus command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Use the add auth group command to add a new authentication. For example, to add a group
named test :
(config)> add auth group test
(config auth group test)>
4. Enable access rights for the group:
n
Admin access:
(config auth group test)> acl admin enable true
(config)>
n
Set the access level for Admin access:
(config)> auth group admin acl admin level value
(config)>
where value is either:
l
full : provides users of this group with the ability to manage the AnywhereUSB Plus
device by using the WebUI or the Admin CLI.