Digi AnywhereUSB Plus, User Manual, Page: 376 / 815

Firewall Port forwarding rules
AnywhereUSB® Plus User Guide 376
n
A white list of devices, based on either IP address or firewall zone, that are authorized to
leverage this forwarding rule.
To configure a port forwarding rule:
É
WebUI
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Click Firewall > Port forwarding .
4. For Add port forward , click g .
The port forwarding rule configuration window is displayed.
Port forwarding rules are enabled by default. To disable, click to toggle off Enable .
5. (Optional) Type a Label that will be used to identify the rule.
6. For Interface , select the network interface for the rule.
Network connections will only be forwarded if their destination address matches the IP
address of the selected network interface.
7. For IP version , select either IPv4 or IPv6 .
Network connections will only be forwarded if they match the selected IP version.
8. For Protocol , select the type of internet protocol.
Network connections will only be forwarded if they match the selected protocol.
9. For Incoming port(s) , type the public-facing port number that network connections must use
for their traffic to be forwarded.
10. For To Address , type the IP address of the server to which traffic should be forwarded.