Digi AnywhereUSB Plus User Manual Download Page 758

Page: 758 / 815

Configure the AnywhereUSB Manager from the command line

group info

AnywhereUSB® Plus User Guide

758

group info

Purpose

Displays information about a group. For more information, see

AnywhereUSB Manager Group Status

pane

Syntax

>awusbmanager group info,[

address

]

The [

address

] is the address of the group for which you want to display information. The address is

required.

Examples

Run the

list

command to determine the group's address.

AnywhereUSB Manager, below are the available devices:

AW02-000001 "HUB-000001" (AW02-000001.local.:18574)
*

Group 2 "Admin group" (AW02-000001.2) (In-use by you)
Group 1 (AW02-000001.1) (In-use by you)

U3 Cruzer Micro (AW02-000001.1101)

* means Autoconnect enabled, + means Autoconnect inherited
Auto-Find: enabled
Autoconnect All: disabled
AnywhereUSB Manager not running as a service

Run the

group info

command.

>awusbmanager group info,AW02-000001.2

Information about the group displays.

ADDRESS: AW02-000001.2
LOCALNAME: Admin group
GROUP: 2
NAME: Group 2
PORTS: 2
AUTOCONNECT: enabled
IN USE BY: YOU

Summary of Contents for AnywhereUSB Plus
















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AnywhereUSB Plus

Reviews:

Digi AnywhereUSB Plus, User Manual, Page: 758 / 815

Search results

Summary of Contents for AnywhereUSB Plus

Reviews: