Digi AnywhereUSB Plus, User Manual, Page: 152 / 815

Interfaces Wide Area Networks (WANs)
AnywhereUSB® Plus User Guide 152
IPv4 DNS server(s) : 245.144.162.207, 245.144.162.208
IPv6 surelink : passing
IPv6 address : 11f6:4680:0d67:59d2:552b:3429:81a8:f1ea
IPv6 gateway : ff50:d95d:7e98:abe8:3030:9138:4f25:f51b
IPv6 MTU : 1500
TX bytes : 127941
RX bytes : 61026
Uptime : 10 hrs, 56 mins (39360s)
SIM
---
SIM Slot
: 1
SIM Status : ready
IMSI : 61582122197895
ICCID : 26587628655003992180
SIM Provider : AT&T
4G
--
RSRQ
: Good (-11.0 dB)
RSRP : Good (-93.0 dBm)
RSSI : Excellent (-64.0 dBm)
SNR : Good (6.4 dB)
>
Unlock a SIM card
A SIM card can be locked if a user tries to set an invalid PIN for the SIM card too many times. In
addition, some cellular carriers require a SIM PIN to be added before the SIM card can be used. If the
SIM card is locked, the AnywhereUSB device cannot make a cellular connection.
Command line
To unlock a SIM card:
1. Log into the AnywhereUSB Plus command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the Admin CLI prompt, use the modem command to set a new PIN for the SIM card:
> modem puk unlock puk_code new_pin modem_name
>
For example, to unlock a SIM card in the modem named modem with PUK code 12345678 , and
set the new SIM PIN to 1234 :
> modem puk unlock 12345678 1234 modem
>