Digi AnywhereUSB Plus, User Manual, Page: 410 / 815

System administration Update system firmware
AnywhereUSB® Plus User Guide 410
3. On the main menu, click System . Under Administration , click Firmware Update .
4. Click Choose file .
5. Browse to the location of the firmware on your local file system and select the file.
6. Click Update Firmware .
Command line
1. Download the AnywhereUSB Plus operating system firmware from the Digi Support FTP site to
your local machine.
2. Log into the AnywhereUSB Plus command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
3. Load the firmware image onto the device:
> scp host hostname-or-ip user username remote remote-path local local-
path to local
where:
n
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the path and filename of the file on the remote host that will be copied
to the AnywhereUSB Plus device.
n
local-path is the location on the AnywhereUSB Plus device where the copied file will be
placed.
4. Verify that the firmware file has been successfully uploaded to the device:
> ls /etc/config/scripts
-rw-r--r--
1 root root 37511229 May 16 20:10 AnywhereUSB
Plus-21.8.24.120.bin
-rw-r--r--
1 root root 2580 May 16 16:44 accns.json
...
>
5. Update the firmware by entering the update firmware command, specifying the firmware file
name.