Digi AnywhereUSB Plus User Manual Download Page 285

Page: 285 / 815

Services

Network Time Protocol

AnywhereUSB® Plus User Guide

285

Note

By default, the access control list for the NTP service is empty, which means that all

downstream hosts connected to the AnywhereUSB Plus device can use the NTP service.

6. (Optional) Add upstream NTP servers that the device will use to synchronize its time. The

default setting is

time.devicecloud.com

To change the default value of the NTP server:

a. Click

NTP servers

b. For

Server

, type a new server name.

To add an NTP server:

a. Click

NTP servers

b. For

Add Server

, click

c. For

Server

, enter the hostname of the upstream NTP server that the device will use

to synchronize its time.

d. Click

to add additional NTP servers. If multiple servers are included, servers are

tried in the order listed until one succeeds.

Note

This list is synchronized with the list of servers included with NTP client configuration,

and changes made to one will be reflected in the other. See

Configure the system time

for

more information about NTP client configuration.

7. (Optional) Configure the system time zone. The default is

UTC

a. Click

System

Time

b. Select the

Timezone

for the location of your AnywhereUSB Plus device.

8. Click

Apply

to save the configuration and apply the change.

Command line

1. Log into the AnywhereUSB Plus command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an

Access selection

menu

. Type

admin

to access the Admin CLI.

2. At the command line, type

config

to enter configuration mode:

> config
(config)>

3. Enable the NTP service:

(config)> service NTP enable true
(config)>

4. (Optional) Add an upstream NTP server that the device will use to synchronize its time to the

appropriate location in the list of NTP servers. The default setting is

time.devicecloud.com

Summary of Contents for AnywhereUSB Plus
















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AnywhereUSB Plus

Reviews:

Digi AnywhereUSB Plus, User Manual, Page: 285 / 815

Search results

Summary of Contents for AnywhereUSB Plus

Reviews: