Digi AnywhereUSB Plus User Manual Download Page 136

Page: 136 / 815

Interfaces

Wide Area Networks (WANs)

AnywhereUSB® Plus User Guide

136

(config)> network modem modem max_intfs

int

(config)>

7. Carrier switching allows the modem to automatically match the carrier for the active SIM.

Carrier switching

is enabled by default. To disable:

(config)> network modem modem carrier_switch false
(config)>

8. Set the type of cellular technology that this modem should use to access the cellular network:

(config)> network modem modem access_tech

value

(config)>

Available options for

value

vary depending on the modem type. To determine available

options:

(config)> network modem modem access_tech ?

Access technology: The cellular network technology that the modem may
use.
Format:

2G
3G
4G
4GM
4GT
all

Default value: all
Current value: all

(config)>

The default is

all

, which uses the best available technology.

9. Set whether the modem should use the main antenna, the auxiliary antenna, or both the main

and auxiliary antennas:

(config)> network modem modem antenna

value

(config)>

where

value

is one of the following:

main

aux

both

10. Save the configuration and apply the change:

(config)> save
Configuration saved.
>

Summary of Contents for AnywhereUSB Plus
















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AnywhereUSB Plus

Reviews:

Digi AnywhereUSB Plus, User Manual, Page: 136 / 815

Search results

Summary of Contents for AnywhereUSB Plus

Reviews: