Digi AnywhereUSB Plus, User Manual, Page: 180 / 815

Interfaces Local Area Networks (LANs)
AnywhereUSB® Plus User Guide 180
a. Click to expand MAC address allowlist .
b. For Add MAC address , click g .
c. Type the MAC address .
14. Click Apply to save the configuration and apply the change.
Command line
1. Log into the AnywhereUSB Plus command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Create a new LAN or edit an existing one:
n
To create a new LAN named my_lan :
(config)> add network interface my_lan
(config network interface my_lan)>
n
To edit an existing LAN named my_lan , change to the my_lan node in the configuration
schema:
(config)> network interface my_lan
(config network interface my_lan)>
4. Set the appropriate firewall zone:
(config network interface my_lan)> zone zone
(config network interface my_lan)>
See Firewall configuration for further information.
5. Select an Ethernet device or a bridge. See Bridging for more information about bridging.
a. Enter device ? to view available devices and the proper syntax.
(config network interface my_lan)> device ?
Current value:
(config network interface my_lan)> device