Digi AnywhereUSB Plus, User Manual, Page: 769 / 815

Configure the AnywhereUSB Manager from the command line known hub remove
AnywhereUSB® Plus User Guide 769
known hub remove
Purpose
Remove a Hub from the known Hubs list.
Note For information about using this feature in the AnywhereUSB Manager , see Manage the list of
known Hubs .
Syntax
>awusbmanager known hub remove,< address> [: port ]
The < address > is the address of the hub that you want to remove from the known Hub list. This is
required.
The < port > is the TCP port number for the Hub you want to remove. This is required if the TCP port
number is not the default (18574).
Examples
Run the
known hub list
command to verify the address and port number of the Hub that you
want to remove.
10.10.01.12:18574
10.10.01.14:18574
10.10.01.15:5600
Run the
known hub remove
command.
n If the TCP port number is the default, entering the port number in the command is optional.
>awusbmanager known hub remove,10.10.01.14
n
If the TCP port number is not the default, entering the port number in the command is
required.
>awusbmanager known hub remove,10.10.01.15:5600
Run the
known hub list
command again to verify that the Hubs have been removed.
10.10.01.12:18574