Digi AnywhereUSB Plus, User Manual, Page: 54 / 815

Manage the Hubs using the AnywhereUSB Manager Manage the list of known Hubs
AnywhereUSB® Plus User Guide 54
For example, you can enable auto connect for a group that has a camera connected to a port in the
group. Every time the computer starts, the
AnywhereUSB Manager starts and automatically connects
the camera to your computer.
Enable auto connect for a group
You can choose to automatically connect to a selected group each time you open the AnywhereUSB
Manager .
Note You can disable auto connect at any time.
1. Open AnywhereUSB Manager .
2. Expand AnywhereUSB Hubs to display the Hubs.
3. Expand a Hub to display the groups in the Hub.
4. Right-click on the AnywhereUSB group to which you want to automatically connect.
5. Select Enable Auto Connect . If you were not already connected to the group, you are
immediately connected to the group. A note appears next to the group name and in the Group
Status pane to show that you are connected to the group.
Disable auto connect for a group
After you have enabled auto connect for a group , you can disable this option. You will no longer
automatically connect to this group when you open the AnywhereUSB Manager .
1. Open the AnywhereUSB Manager .
2. Expand AnywhereUSB Hubs to display the Hubs.
3. Expand a Hub to display the groups in the Hub.
4. Right-click on the AnywhereUSB group to which you no longer want to automatically connect
at start up.
5. Select Disable Auto Connect to turn off the auto connect feature for the group.
Manage the list of known Hubs
You can create a list of Hubs to which your AnywhereUSB Manager is allowed to connect when you
open it. The Hubs you add to the list can be on the same network as your computer, or on a different
network.
Hubs that you have added to the known Hubs list display when you open the AnywhereUSB
Manager . These Hubs are in addition to any Hubs that are automatically discovered if you have
enabled the Autofind Hubs feature .
Add a Hub to the known Hub list
You can use one of two methods to manually add a Hub to the known Hubs list:
n
Right-click method
n
Known Hubs dialog
The Hubs can be on the same network as your computer, or on a different network.