Digi AnywhereUSB Plus User Manual Download Page 762

Page: 762 / 815

Configure the AnywhereUSB Manager from the command line

hidden hub remove

AnywhereUSB® Plus User Guide

762

hidden hub remove

Purpose

Remove a Hub from the hidden Hubs list.

Syntax

>awusbmanager hidden hub remove,<

address>

port

]

The <

address

> is the address of the hub that you want to remove from the hidden Hub list. This is

required.

The <

port

> is the TCP port number for the Hub you want to remove. This is required if the TCP port

number is not the default (18574).

Examples

Run the

hidden hub list

command to verify the address and port number of the Hub that you

want to remove.

10.10.10.21:18574
10.10.10.34:18574
10.10.10.56:5600

Run the

hidden hub remove

command.

If the TCP port number is the default, entering the port number in the command is optional.

>awusbmanager hidden hub remove,10.10.10.34

If the TCP port number is not the default, entering the port number in the command is
required.

>awusbmanager hidden hub remove,10.10.10.56:5600

Run the

hidden hub list

command again to verify that the specified Hubs have been removed.

10.10.10.21:18574

Summary of Contents for AnywhereUSB Plus
















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AnywhereUSB Plus

Reviews:

Digi AnywhereUSB Plus, User Manual, Page: 762 / 815

Search results

Summary of Contents for AnywhereUSB Plus

Reviews: