Diagnostics
Analyze network traffic
AnywhereUSB® Plus User Guide
488
i. Add a new port filter:
(config network analyzer
name
)> add filter port end
(config network analyzer
name
filter port 0)>
ii. Set the transport protocol that should be filtered for the port:
(config network analyzer
name
filter port 0)> protocol
value
(config network analyzer
name
filter port 0)>
where
value
is one of
tcp
,
udp
, or
either
. The default is either.
iii. Set whether the filter should apply to packets when the port is the source, the
destination, or both:
(config network analyzer
name
filter port 0)> match
value
(config network analyzer
name
filter port 0)>
where
value
is one of:
n
source
: The filter will apply to packets when the port is the source.
n
destination
: The filter will apply to packets when the port is the destination.
n
either
: The filter will apply to packets when the port is either the source or the
destination.
iv. (Optional) Set the filter should ignore packets from this port:
(config network analyzer
name
filter port 0)> ignore true
(config network analyzer
name
filter port 0)>
By default, is option is set to
false
, which means that the filter will capture packets
from this port.
v. Repeat these steps to add additional port filters.
d. To create a filter that either captures or ignores packets from one or more specified MAC
addresses:
i. Add a new MAC address filter:
(config network analyzer
name
)> add filter mac_address end
(config network analyzer
name
filter mac_address 0)>
ii. Set the MAC address that should be be captured or ignored:
(config network analyzer
name
filter mac_address 0)> address
value
(config network analyzer
name
filter mac_address 0)>
where
value
is the MAC address to be filtered, using colon-hexadecimal notation with
lower case, for example,
00:aa:11:bb:22:cc
.
iii. Set whether the filter should apply to packets when the MAC address is the source,
the destination, or both:
(config network analyzer
name
filter mac_address 0)> match
value
(config network analyzer
name
filter mac_address 0)>
where
value
is one of:
Summary of Contents for AnywhereUSB Plus
