Digi AnywhereUSB Plus, User Manual, Page: 143 / 815

Interfaces Wide Area Networks (WANs)
AnywhereUSB® Plus User Guide 143
iii. For Interface , select Interface: WWAN_Public .
g. Click the g to add another route policy.
h. For Label , enter Route through private APN .
i. For Interface , select Interface: WWAN_Private .
j. Configure the source address:
i. Click to expand Source address .
ii. For Type , select Interface .
iii. For Interface , select LAN2 .
k. Configure the destination address:
i. Click to expand Destination address .
ii. For Type , select Interface .
iii. For Interface , select Interface: WWAN_Private .
6. Click Apply to save the configuration and apply the change.
Command line
1. Log into the AnywhereUSB Plus command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.