Digi AnywhereUSB Plus, User Manual, Page: 387 / 815

Firewall Packet filtering
AnywhereUSB® Plus User Guide 387
3. Determine the index number of the appropriate port forwarding rule:
(config)> show firewall filter
0
action accept
dst_zone any
enable true
ip_version any
label Allow all outgoing traffic
protocol any
src_zone internal
1
action drop
dst_zone internal
enable true
ip_version any
label My packet filter
protocol any
src_zone external
(config)>
4. To enable a packet filtering rule, use the index number with the enable true command. For
example:
(config)> firewall filter 1 enable true
5. To disable a packet filtering rule, use the index number with the enable false command. For
example:
(config)> firewall filter 1 enable false
6. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Delete a packet filtering rule
To delete a packet filtering rule:
É
WebUI