Detroit Diesel 4000 Series, Service Manual, Page: 356 / 2706

SERIES 4000 12/16V SERVICE MANUAL
C 024.05.12 – AFTER-INSTALLATION OPERATIONS
Listed in Table 19 are the After-Installation Operations for the gear case (gear case end).
Level of Maintenance Operation Reference
1, 2, 3 Install drive hub Refer to section C 035.05.11
1, 2, 3 Install high pressure fuel pump Refer to section C 073.05.11
1, 2, 3 Install generator drive Refer to section C 213.05.11
1, 2, 3 Install generator Refer to section C 213.05.11
1, 2, 3 Install oil filter Refer to section C 183.05.11
1, 2, 3 Install centrifugal filter Refer to section C 184.05.11
1, 2, 3 Install and connect electric wiring Refer to section C 501.05 M
1, 2, 3 Install coolant housing with thermostat Refer to section C 208.05.11
1, 2, 3 Install charge air coolant pump Refer to section C 206.05.11
1, 2, 3 Install coolant pump Refer to section C 202.05.11
1, 2, 3 Install charge air coolant lines Refer to section C 206.05.11
1, 2, 3 Install coolant vent lines Refer to section C 205.05.11
1, 2, 3 Install charge air coolant vent lines Refer to OEM Guidelines
1, 2, 3 Install gear case (gear case end) Refer to section C 024.05.11
1, 2, 3 Install vibration damper Refer to section C 035.05.11
1, 2, 3 Install fan drive Refer to section C 221.05.11
1, 2, 3 Fill oil system with engine oil Operator Guide
1, 2, 3 Enable engine power Refer to Operators Guide
1 = The engine is to be completely disassembled.
2 = The engine is to be removed but not completely disassembled.
3 = The engine is to remain installed.
Table 19 After-Installation Operations
All information subject to change without notice.
C -210
Copyright © DETROIT DIESEL CORPORATION