Detroit Diesel 4000 Series, Service Manual, Page: 1380 / 2706

SERIES 4000 12/16V SERVICE MANUAL
C 186.05.12 – AFTER-INSTALLATION OPERATIONS
Listed in Table 115 are the After-Installation Operations for the oil system for piston.
Level of
Maintenance
Operation Reference
1, 2, 3 Install gear case, gear case end Refer to section C 024.05.11
1, 2, 3 Connect DDEC harness Refer to section C 501.05 M
1, 2, 3 Install SRS Wheel Refer to section C 032.05.11
1, 2, 3 Install front drive hub (gear case end) on crankshaft Refer to section C 035.05.11
1, 2, 3 Install vibration damper Refer to section C 035.05.11
1, 2, 3 Install trunnion mounts Refer to section C 231.05.11
1, 2, 3 Install coolant lines (high-temperature) Refer to section C 204.05.11
1, 2, 3 Install charge air coolant line (low temperature) Refer to section C 207.05.11
1, 2, 3 Install oil pan Refer to section C 014.05.11
1, 2, 3 Install fan drive Refer to section C 221.05.11
1, 2, 3 Fill engine coolant system Refer to Operators Guide
1, 2, 3 Fill charge air coolant system Refer to section C 206.05.11
1, 2, 3 Fill oil system with engine oil Refer to Operators Guide
1, 2, 3 Inspect for leaks Refer to Operators Guide
1, 2, 3 Enable engine power Refer to Operators Guide
1 = The engine is to be completely disassembled.
2= The engine is to be removed but not completely disassembled.
3= The engine is to remain installed.
Table 115 After-Installation Operations
All information subject to change without notice.
C -1234
Copyright © DETROIT DIESEL CORPORATION