Detroit Diesel 4000 Series, Service Manual, Page: 1790 / 2706

SERIES 4000 12/16V SERVICE MANUAL
27. Remove wear sleeve (1) from shaft (3). See Figure 1082.
NOTE:
Use chisel (2) to score wear sleeve (1) with three marks 120 degrees apart.
1. Wear Sleeve 3. Shaft
2. Chisel
Figure 1082 Removal of Wear Sleeve
NOTE:
Do not remove retainer seal assembly (step 28) if not damaged, worn, or otherwise
in need of replacement.
28. Using an hydraulic press or large chisel, remove the rear retainer seal assembly (1) from
the shaft. See Figure 1083.
All information subject to change without notice.
C -1644
Copyright © DETROIT DIESEL CORPORATION