Detroit Diesel 4000 Series, Service Manual, Page: 133 / 2706

SERIES 4000 12/16V SERVICE MANUAL
Engine Removal
Listed in Table 3 are the operations for engine removal.
Operations Refer to Section
Shut off fuel supply Refer to Operators Guide
Drain engine oil while engine is warm, if possible Refer to Operators Guide
Examine oil sludge for metallic residues Refer to Operators Guide
Drain engine coolant when temperature of coolant is below 60 C Refer to Operators Guide
Drain charge air coolant Refer to Operators Guide
Wash engine without using chemical cleaning agents -
Disconnect all connections -
Seal open connections with non-linting plugs and covers -
Release engine securing bolts -
Remove engine and place on engine stand -
Using a lifting device, attach engine only on suspension brackets
provided as shown in installation drawing, taking center of gravity and
transportation specifications into consideration.
Refer to Operators Guide
Table 3 Operations for Engine Removal
Engine Weight
(Dry weight)
12V is approximately 6070 kg (13, 920 lbs).
16V is approximately 7173 kg (15,814 lbs).
All information subject to change without notice.
Copyright © DETROIT DIESEL CORPORATION
B -19