Detroit Diesel 4000 Series, Service Manual, Page: 305 / 2706

SERIES 4000 12/16V SERVICE MANUAL
8. Tighten all hex bolts for securing flywheel housing and cylinder block to specification.
Refer to section A 003. See Figure 105.
NOTE:
First tighten hex bolts in the inner circle of flywheel, then tighten all hex bolts in interior of
flywheel housing; finally, tighten the bolts at the outer rim of the flywheel housing. Torque
all hex bolts clockwise. See Figure 105.
9. Carefully remove excess gasket eliminator from the parting line between flywheel housing
(2) and oil pan mating surface at the cylinder block (1). See Figure 117.
1. Cylinder Block 2. Flywheel Housing
Figure 117 Removing Excess Gasket Eliminator from Parting Line
All information subject to change without notice.
Copyright © DETROIT DIESEL CORPORATION
C -159