Detroit Diesel 4000 Series, Service Manual, Page: 1001 / 2706

SERIES 4000 12/16V SERVICE MANUAL
To avoid personal injury while using a lifting device, never
stand beneath a suspended load.
Use a suitable lifting
device and review all manufacturer’s cautionary notes.
NOTE:
High altitude applications require a Helicoflex
®
gasket and spacer installed between
the turbocharger and exhaust manifold.
Helicoflex
®
is a registered trademark of Garlock Helicoflex™, a subsidiary of B.F.
Goodrich Aerospace
®
.
5. Attach turbocharger (1) to crane and, together with bracket, carefully install on the
studs. See Figure 621.
1. Turbocharger 3. Spacer Bushing
2. Hex Nut 4. Exhaust Manifold
Figure 621 Tightening Turbocharger Diagonally with Hex Nuts
6. Install spacer bushings (3) and nuts.
7. Tighten hex nuts (2) on the turbocharger flange diagonally and evenly to specification.
Refer to section A 003 .
All information subject to change without notice.
Copyright © DETROIT DIESEL CORPORATION
C -855