Detroit Diesel 4000 Series, Service Manual, Page: 1822 / 2706

SERIES 4000 12/16V SERVICE MANUAL
22. Rotate front bearing retainer (3) 180 degrees on the press bed. See Figure 1105.
1. Oil Seal 3. Front Bearing Retainer
2. Bearing Press Block
Figure 1105 Installation of Oil Seal
23. Coat the outside diameter of front oil seal (1) with Loctite #242 (or equivalent). Using
bearing press block (2), install oil seal (1) in front bearing retainer (3), flush with the front
face. See Figure 1105.
24. Place the fan mounting assembly on the press bed.
All information subject to change without notice.
C -1676
Copyright © DETROIT DIESEL CORPORATION