Delta DVP-10PM, Applications Manual

Page: 220 / 561

5
Categories and Use of Basic Application Instructions
DVP-PM Application Manual 5-83
Adjust the D/A conversion curve of DVP02DA-H2. Set the OFFSET value of CH2 as 0mA ( = K0
LSB
) and GAIN value
as 10mA
（
= K1,000
LSB
).
M1002
TO K1 K1 H18 K1
TO K1 K33 H0 K1
X0
TO K1 K22 K0 K1
TO
K1 K28 K1000 K1
1. Write H’18 into CR#1 of analog output module No. 1 to set CH2 as mode 3 (current output: 0mA ~ +20mA).
2. Write H’0 into CR#33 to allow OFFSET/GAIN tuning in CH1 and CH2.
3. When X0 goes from OFF to ON, write the OFFSET value K0
LSB
into CR#22 and the GAIN value K1,000
LSB
into
CR#28.
FROM/TO Application Example 4:
Adjust the D/A conversion curve of DVP02DA-H2. Set the OFFSET value of CH2 as 2mA ( = K400
LSB
) and GAIN
value as 18mA ( = K3,600
LSB
)
.
M1002
TO K1 K1 H10 K1
TO K1 K33 H0 K1
X0
TO K1 K23 K400 K1
TO K1 K29 K3600 K1
1. Write H’10 to CR#1 of analog output module No. 1 to set CH2 as mode 2 (current output: +4mA ~ +20mA).
2. Write H’0 to CR#33 to allow OFFSET/GAIN tuning in CH1 and CH2.
3. When X0 goes from OFF to ON, write the OFFSET value K400
LSB
into CR#23 and GAIN value K3,600
LSB
into
CR#29.