Delta DVP-10PM, Applications Manual

Page: 450 / 561

11
G-code Application
DVP-PM Application Manual
11-13
Step 6: Enter the G-code download window. The functions of each block are explained as below. Select the
G-code file to be downloaded in block (1). When download is finished, press BACK to return to previous
page. If the file is too big, CRC value error will be displayed on the screen.
1
G-code file selection window:
Select the G-code file to be downloaded in
this window
2
G-code preview window:
The selected G-code can be previewed in
this window
3
Station number:
Set up the station number of 20PM00M
4
Download:
Click Download to start the G-code download
process
5
Back:
Click Back to return to previous page
Step 7: If you want to change the G-code file, repeat the process of step 5 and step 6.
11.2.3 Download by HMI other than B type through D registers
Users can also download G-codes by HMIs other than B-type. Set up the recipe on HMI and design the user
program for receiving G-codes on DVP-PM00M. When both sides are ready, the G-codes can be
downloaded through HMI directly.
The G-code download program designed in DVP-PM00M should operate in below steps: 1. initialize
download process, 2. design the size of recipe according to the recipe format set up in HMI, 3. execute the
program and the G-codes will be downloaded to designated registers in PLC according to the recipe set up
in HMI. Please note that the recipe sets up the total number of G-codes but the whole G-code file requires
several times of transmission for a complete download process. Therefore, in actual application the G-code
file will be separated into many groups, and only one group will be transmitted by one time. File conversion
will be executed every time when one group of G-code is received. If the conversion results are correct, the
filtered G-codes will be displayed in the designated register. If an error in file conversion, error code 0xffff
and the error row number will be displayed in designated registers
After one group are received, DVP-PM sents another value to change the group number and repeats the