6 How to program the adjustable frequency drive
6.1 How to program
6.1.1 Parameter set-up
Overview of parameter groups
Group
Title
Function
0-
Operation/Display
Parameters related to the fundamental functions of the adjustable frequency drive,
function of the LCP buttons and configuration of the LCP display.
1-
Load / Motor
Parameter group for motor settings.
2-
Brakes
Parameter group for setting brake features in the adjustable frequency drive.
3-
Reference / Ramps
Parameters for reference handling, defining limitations, and configuring the
reaction of the adjustable frequency drive to changes.
4-
Limits / Warnings
Parameter group for configuring limits and warnings.
5-
Digital In/Out
Parameter group for configuring the digital inputs and outputs.
6-
Analog In/Out
Parameter group for configuring the analog inputs and outputs.
8-
Communication and Options
Parameter group for configuring communications and options.
9-
Profibus
Parameter group for Profibus-specific parameters.
10-
DeviceNet Serial Communication Bus
Parameter group for DeviceNet-specific parameters.
13-
Smart Logic
Parameter group for Smart Logic Control
14-
Special Functions
Parameter group for configuring special adjustable frequency drive functions.
15-
Drive Information
Parameter group containing adjustable frequency drive information such as
operating data, hardware configuration and software versions.
16-
Data Readouts
Parameter group for data readouts, such as current references, voltages, control,
alarm, warning and status words.
18-
Info and Readouts
This parameter group contains the last 10 Preventive Maintenance logs.
20-
Drive Closed-loop
This parameter group is used for configuring the closed-loop PID controller that
controls the output frequency of the unit.
21-
Extended Closed-loop
Parameters for configuring the three extended closed-loop PID controllers.
22-
Application Functions
These parameters monitor water applications.
23-
Time-based Functions
These parameters are for actions to be performed on a daily or weekly basis, such
as different references for working hours/non-working hours.
25-
Basic Cascade Controller Functions
Parameters for configuring the Basic Cascade Controller for sequence control of
multiple pumps.
26-
Analog I/0 Option MCB 109
Parameters for configuring the Analog I/0 Option MCB 109.
27-
Extended Cascade Control
Parameters for configuring the extended cascade control.
29-
Water Application Functions
Parameters for setting water specific functions.
31-
Bypass Option
Parameters for configuring the bypass option
Table 6.1 Parameter Groups
Parameter descriptions and selections are displayed on the Graphic LCP or Numeric LCP in the display area (See Section 5
for details.) Access the parameters by pressing the [Quick Menu] or [Main Menu] key on the control panel. The quick menu
is used primarily for commissioning the unit at start-up by providing those parameters necessary to start operation. The
main menu provides access to all the parameters for detailed application programming.
How to program the adjustab...
VLT AQUA 12-Pulse High Power Instruction Manual
MG.20.Y1.22 - VLT
®
is a registered Danfoss trademark
6-1
6
6
