Danfoss VLT AQUA Drive FC 200, Instruction Manual

Page: 100 / 155

6.3.3 Load/Motor 1-**
Par. No.
# Parameter description Default value 4 set-up Change during
operation
Conver-
sion index
Type
1-0* General Settings
1-00
Configuration Mode null All set-ups TRUE - Uint8
1-01 Motor Control Principle null All set-ups FALSE - Uint8
1-03 Torque Characteristics
[3] Auto Energy Optim.
VT All set-ups TRUE - Uint8
1-1* Motor Selection
1-10
Motor Construction [0] Asynchron All set-ups FALSE - Uint8
1-2* Motor Data
1-20
Motor Power [kW] ExpressionLimit All set-ups FALSE 1 Uint32
1-21 Motor Power [HP] ExpressionLimit All set-ups FALSE -2 Uint32
1-22 Motor Voltage ExpressionLimit All set-ups FALSE 0 Uint16
1-23 Motor Frequency ExpressionLimit All set-ups FALSE 0 Uint16
1-24 Motor Current ExpressionLimit All set-ups FALSE -2 Uint32
1-25 Motor Nominal Speed ExpressionLimit All set-ups FALSE 67 Uint16
1-28 Motor Rotation Check [0] Off All set-ups FALSE - Uint8
1-29
Automatic Motor Adaptation
(AMA)
[0] Off All set-ups FALSE - Uint8
1-3* Adv. Motor Data
1-30
Stator Resistance (Rs) ExpressionLimit All set-ups FALSE -4 Uint32
1-31 Rotor Resistance (Rr) ExpressionLimit All set-ups FALSE -4 Uint32
1-35 Main Reactance (Xh) ExpressionLimit All set-ups FALSE -4 Uint32
1-36 Iron Loss Resistance (Rfe) ExpressionLimit All set-ups FALSE -3 Uint32
1-39 Motor Poles ExpressionLimit All set-ups FALSE 0 Uint8
1-5* Load Indep. Setting
1-50
Motor Magnetization at Zero
Speed
100 % All set-ups TRUE 0 Uint16
1-51
Min Speed Normal
Magnetizing [RPM]
ExpressionLimit All set-ups TRUE 67 Uint16
1-52
Min Speed Normal
Magnetizing [Hz]
ExpressionLimit All set-ups TRUE -1 Uint16
1-6* Load Depen. Setting
1-60
Low Speed Load Compen-
sation
100 % All set-ups TRUE 0 Int16
1-61
High Speed Load Compen-
sation
100 % All set-ups TRUE 0 Int16
1-62 Slip Compensation 0 % All set-ups TRUE 0 Int16
1-63
Slip Compensation Time
Constant
ExpressionLimit All set-ups TRUE -2 Uint16
1-64 Resonance Dampening 100 % All set-ups TRUE 0 Uint16
1-65
Resonance Dampening Time
Constant
5 ms All set-ups TRUE -3 Uint8
1-7* Start Adjustments
1-71
Start Delay 0.0 s All set-ups TRUE -1 Uint16
1-73 Flying Start [0] Disabled All set-ups FALSE - Uint8
1-74 Start Speed [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
1-75 Start Speed [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
1-76 Start Current 0.00 A All set-ups TRUE -2 Uint32
How to program the adjustab... VLT AQUA 12-Pulse High Power Instruction Manual
MG.20.Y1.22 - VLT
®
is a registered Danfoss trademark 6-37
6 6