Danfoss VLT AQUA Drive FC 200, Instruction Manual

Page: 102 / 155

6.3.4 Brakes 2-**
Par. No.
# Parameter description Default value 4 set-up Change
during
operation
Conver-
sion index
Type
2-0* DC Brake
2-00
DC Hold/Preheat Current 50 % All set-ups TRUE 0 Uint8
2-01 DC Brake Current 50 % All set-ups TRUE 0 Uint16
2-02 DC Braking Time 10.0 s All set-ups TRUE -1 Uint16
2-03 DC Brake Cut-in Speed [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
2-04 DC Brake Cut-in Speed [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
2-1* Brake Energy Funct.
2-10
Brake Function [0] Off All set-ups TRUE - Uint8
2-11 Brake Resistor (ohm) ExpressionLimit All set-ups TRUE 0 Uint16
2-12 Braking Energy Limit (kW) ExpressionLimit All set-ups TRUE 0 Uint32
2-13 Braking Energy Monitoring [0] Off All set-ups TRUE - Uint8
2-15 Brake Check [0] Off All set-ups TRUE - Uint8
2-16 AC Brake Max. Current 100.0% All set-ups TRUE -1 Uint32
2-17 Overvoltage Control [2] Enabled All set-ups TRUE - Uint8
How to program the adjustab... VLT AQUA 12-Pulse High Power Instruction Manual
MG.20.Y1.22 - VLT
®
is a registered Danfoss trademark 6-39
6 6