Danfoss MCO 305, Design Manual, Page: 214 / 242

MCO 305 Design Guide
__ Parameter Reference __
¾ default setting [ ] value for use in communication via serial communication port
214
MG.33.L4.02 – VLT
®
is a registered Danfoss trademark
†
Parameter Lists
The parameters are determined by parameter numbers. We recommend using the alphabetical overview as
a guide; then you will be able to find detailed information very quickly using the number.
Changes during operation
“TRUE” means that the parameter can be changed, while the frequency converter is in operation.
“FALSE” means that the frequency converter must be stopped before a change can be made.
4-Set-up
“1-Set-up”: Data value will be the same in all set-ups.
Conversion index
This number refers to a conversion figure used
when writing or reading by means of a frequency
converter.
Please see for all conversion indices the FC 300
Design Guide.
Conversion index 0
Conversion factor 1
Data type
Please see for all data types the FC 300 Design
Guide.
Data type Description Type
2 Integer 8 Int8
3 Integer 16 Int16
4 Integer 32 Int32
5 Unsigned 8 Uint8
6 Unsigned 16 Uint16
7 Unsigned 32 Uint32
†
Application Parameters, Parameter List
Par. No. # Parameter name Parameter description Default
setting
Changes during
operation
4-set-up Conver-
sion
index
Type
19-0* Application Parameters
19-00 Application parameters 0 'TRUE'
… TRUE
19-89 Application parameters 0 TRUE
19-9* Read-only Application Parameters
19-90 Application parameter 90 0 read only 1 set-up 0 Int32
19-91 Application parameter 91 0 read only
1 set-up
0
Int32
19-92 Application parameter 92 0 read only
1 set-up
0
Int32
19-93 Application parameter 93 0 read only
1 set-up
0
Int32
19-94 Application parameter 94 0 read only
1 set-up
0
Int32
19-95 Application parameter 95 0 read only
1 set-up
0
Int32
19-96 Application parameter 96 0 read only
1 set-up
0
Int32
19-97 Application parameter 97 0 read only
1 set-up
0
Int32
19-98 Application parameter 98 0 read only
1 set-up
0
Int32
19-99 Application parameter 99 0 read only
1 set-up
0
Int32