![background image](http://html.mh-extra.com/html/daikin/2mxu40gv1b/2mxu40gv1b_service-manual_501101096.webp)
Operation Manual
SiBE12-908
85
Installation / Operation Manual
To start 3-D airflow
1. 3. Press the “SWING
” button and the “SWING
” button: the “
” and “
”
display will light up and the flap and louvers will move in turn.
To cancel 3-D airflow
2. 4. Press either the “SWING
” button or the “SWING
” button.
COMFORT AIRFLOW operation
• Check COMFORT AIRFLOW operation in the section of “COMFORT AIRFLOW Operation” and “INTELLIGENT EYE Operation”. (page 15.)
NOTE
Adjusting the 3-D airflow direction
Notes on flaps and louvers angles
• When “SWING” button is selected, the flaps swinging range depends on the operation
mode. (See the figure.)
3-Dimensional (3-D) airflow
• Using 3-dimensional airflow circulates cold air, which tends to collected at the bottom of
the room, and hot air, which tends to collect near the ceiling, throughout the room,
preventing areas of cold and hot developing.
ATTENTION
• Always use a remote controller to adjust the angles of the flaps and louvers. If you
attempt to move it forcibly with hand when it is swinging, the mechanism may be broken.
• Always use a remote controller to adjust the louvers angles. In side the air outlet, a fan is
rotating at a high speed.
In DRY mode or
COOL mode
COMFORT AIRFLOW
(page 15.)
5°
15°
50°
In HEAT mode
Upper limit
Lower limit
Stop operation
Stop operation
30°
Upper limit
Lower limit
70°
80°
COMFORT AIRFLOW (page 15.)
In FAN mode
Upper limit
5°
80°
Lower limit
Stop operation
11