![background image](http://html.mh-extra.com/html/daikin/2mxu40gv1b/2mxu40gv1b_service-manual_501101081.webp)
SiBE12-908
Installation Manual
Installation / Operation Manual
70
Refrigerant Piping Work
1. Installing outdoor unit.
1) When installing the outdoor unit, refer to “Outdoor Unit Installation Drawings” on page 3.
2) If drain work is necessary, follow the procedures below.
2. Drain work.
1) Use C drain plug for drainage.
2) If the drain port is covered by a mounting base or floor surface, place
additional foot bases of at least 30mm in height under the outdoor unit’s feet.
3) In cold areas, do not use a drain hose with the outdoor unit.
(Otherwise, drain water may freeze, impairing heating performance.)
3. Refrigerant piping.
CAUTION
1) Use the flare nut fixed to the main unit. (To prevent cracking of the flare nut by aged deterioration.)
2) To prevent gas leakage, apply refrigeration oil only to the inner surface of the flare. (Use refrigeration oil for R410A.)
3) Use torque wrenches when tightening the flare nuts to prevent damage to the flare nuts and gas leakage.
Align the centres of both flares and tighten the flare nuts 3 or 4 turns by hand. Then tighten them fully with the torque wrenches.
6
Drain-water hole
Bottom frame
C Drain plug
Hose (available commercially,
inner dia. 16mm)
[Apply oil]
[Tighten]
Do not apply refrigeration
oil to the outer surface.
Flare nut
Apply refrigeration oil to
the inner surface of the
flare.
Do not apply refrigeration
oil to the flare nut avoid
tightening with over torque.
Torque wrench
Spanner
Piping union
Flare nut
Flare nut tightening torque
Flare nut for
φ
6.4
14.2–17.2N • m
(144–175kgf • cm)
Flare nut for
φ
9.5
32.7–39.9N • m
(333–407kgf • cm)
Flare nut for
φ
12.7
49.5–60.3N • m
(505–615kgf • cm)
Valve cap tightening torque
Gas side
Liquid side
3/8 inch
1/2 inch
1/4 inch
21.6-27.4N • m
(220-280kgf • cm)
48.1-59.7N • m
(490-610kgf • cm)
21.6-27.4N • m
(220-280kgf • cm)
Service port cap
tightening torque
10.8-14.7N • m
(110-150kgf • cm)