SiBE12-908
Indoor Unit
Removal Procedure
212
2
Remove the fan rotor
by loosening the lock
screw.
Reassembling the fan motor
When reassembling the fan
rotor, provide as much as
5mm of play between the
side face of the rotor and the
bottom frame.
���
Insert the fan motor approx.
5mm
���
Tighten the screw until it
stops. Then turn the screw
in one scroll.
���
Move the fan rotor and
confirm the fan motor and
the fan rotor are installed
appropriately.
���
Tighten the screw
completely if appropriate.
���
If not appropriate, go back to
���
.
3
Press the rubber-made
bearing with force from
outside.
4
Remove the bearing.
Step
Procedure
Points
(R8120)
Lock screw
Fan motor
(R2808)
Side face of rotor
Side face of
bottom frame
5mm
(R9582)
(R8121)
(R8122)