SiBE12-908
Operation Manual
Installation / Operation Manual
92
3.8
ECONO Operation
ECONO Operation
ECONO operation is a function which enables efficient operation by limiting the maximum
power consumption value.
This function is useful for cases in which attention should be paid to ensure a circuit breaker
will not trip when the product runs alongside other appliances.
To start ECONO operation
1. Press “ECONO” button.
• “
” is displayed on the LCD.
To cancel ECONO operation
2. Press “ECONO” button again.
• “
” disappears from the LCD.
• This diagram is a representation for illustrative purposes only.
• The maximum running current and power consumption of the air conditioner in ECONO mode
vary with the connecting outdoor unit.
NOTE
1, 2
Running current and
power consumption
Normal
operation
ECONO
Mode
Maximum during
normal operation
Maximum during
ECONO Mode
Time
From start up until set
temperature is reached
• ECONO operation can only be set when the unit is running. Pressing the OFF button causes the setting to be canceled, and the “
”
disappears from the LCD.
• ECONO operation is a function which enables efficient operation by limiting the power consumption of the outdoor unit (operating
frequency).
• ECONO operation functions in AUTO, COOL, DRY and HEAT modes.
• In case ECONO operation is selected in QUIET operation, QUIET operation will be canceled.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• Power consumption may not drop even if ECONO operation is used of the level of power consumption is already low.
18
