manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 98

4.10 Add a New Graph to the Grafana Dashboard

Prerequisites

This procedure requires administrative privileges. Before performing this procedure, use the 

urika-state

command to ensure that the system is operating in the service mode that supports using Grafana. For more
information, see the 

urika-state

 man page and refer to 

Urika-GX Service Modes

 on page 177.

About this task

In addition to the default set of panels, administrators can add additional panels to the Dashboard of the Grafana
UI, as described in the following instructions.

Procedure

1. Access the Grafana UI using the Urika-GX Applications Interface by pointing a browser at 

http://

hostname

(which is the recommended method) or at http://

hostname

:3000

.

2. Log on to Grafana by entering LDAP credentials, or credentials of the default Grafana account (username:

admin

, password: 

admin

) to log on to Grafana.

Figure 20. Grafana Login Screen

3. Select the dashboard that the new graph needs to be added to.

System Monitoring

S3016 

 

 98

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands