manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 111

Syntax: 

history

Parameters: None

Example:

[r0s0i0 /]# 

history

tty

help

history

ver

ok

[r0s0i0 /]#

lasterr

Display recently occurred event log or clear the last log

Syntax: 

lasterr [clear]

Parameters:

clear

Clear the last log and reset the red LED on the iSCB front panel

Example:

[r0s0i0 /]# 

iscb lasterr

ALERT: CFU02 failed

ok

[r0s0i0 /]# 

iscb lasterr clear

ok

[r0s0i0 /]# 

iscb lasterr

      

ok

[r0s0i0 /]# 

led

Turn Off the green/red LED and the node’s ID-LED

Syntax: 

led <on|off> <node|all>

Parameters:

on

Turn on the specific nodes idled. If node is already turned on, there will
be no action.

off

Turn off the specific nodes idled. If node is already turned off, there will
be no action.

node|
all

Refer to ‘power’ command

Example:

[r0s0i0 /]# 

iscb led on 1

ok

[r0s0i0 /]# 

iscb led off 1

ok

[r0s0i0 /]# 

iscb led on all

ok

[r0s0i0 /]# 

iscb led off all

ok

log

Display event logs by one of three specified log levels: info, critical, and warning

System Monitoring

S3016 

 

 111

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands