manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 82

Figure 6. Basic Metrics Dashboard

●

Compute Node Performance Statistics - Displays graphs representing statistical data related to network,
CPU, and I/O utilization for all Urika-GX compute nodes.

This dashboard contains the following graphs:

○

▪

CPU MEMORY UTILIZATION

▪

CPU utilization - Displays the overall CPU utilization for all the compute nodes.

▪

Memory utilization - Displays the overall memory (in KB or GB) used by all the compute nodes.

○

FILE SYSTEM READS/WRITE BYTES/SEC

▪

Root File System Hard Drive (/dev/sda) Reads/Writes Bytes/Sec (200MB/sec max) - Displays
information about the usage of memory on the root file system by compute nodes..

▪

2nd Hard Drive (/dev/sdb) Read/Writes - Displays information about the usage of memory by
compute nodes on the secondary hard drive.

▪

Lustre Read/Writes Per/Second - Displays the number of Lustre reads/writes by compute nodes.

▪

SSD Read/Writes Per/Second - Displays the number of reads/writes of the compute node SSDs
installed on the system.

○

NETWORK READS/WRITES

System Monitoring

S3016 

 

 82

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands