manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 194

Creating a Tenant - Once a tenant is configured, create it using the 

ux-tenant-create

 command as root on

the SMW. To create a tenant named 

myTenant

 in the configuration:

# 

ux-tenant-create myTenant

When this command completes, the tenant VM will be defined and running on the specified host node.

See the 

ux-tenant-create

 man page for more information on this command.

Stopping and Starting a Tenant

Use the 

ux-tenant-stop

 and 

ux-tenant-start

 commands as root on the SMW to start and stop tenant

VMs on Urika-GX.

To stop a running tenant VM named 

myTenant

, execute:

# 

ux-tenant-stop myTenant

To start that tenant VM execute:

# 

ux-tenant-start myTenant

See the 

ux-tenant-stop

 and 

ux-tenant-start

 man pages for more information on these commands.

Displaying Tenant Status

Use the 

ux-tenant-status

 command as root on the SMW to obtain the status of tenant VMs on Urika-GX. To

list the status of all tenants on the system, execute:

# 

ux-tenant-status -a

TenantName          |PingStatus |SSHStatus |State     |LoadAverage    |Uptime  |Logged In |Management IP   |

default             |N/A        |N/A       |notfound  |N/A            |N/A     |None      |10.142.150.1    |

cb_tenant_00        |N/A        |N/A       |notfound  |N/A            |N/A     |None      |10.142.166.100  |

cb_tenant_01        |N/A        |N/A       |notfound  |N/A            |N/A     |None      |10.142.166.101  |

cb_tenant_02        |N/A        |N/A       |notfound  |N/A            |N/A     |None      |10.142.166.102  |

cb_tenant_03        |N/A        |N/A       |notfound  |N/A            |N/A     |None      |10.142.166.103  |

The 

ux-tenant-status

 command can also be used to list the status of a specific tenant or list of tenants. To

list the status of the tenant named 

myTenant

 in the configuration, execute:

# 

ux-tenant-status myTenant

See the 

ux-tenant-status

 man page for more information on this command.

Removing A Tenant

A tenant VM that is no longer required can be removed by executing the 

ux-tenant-remove

 command as root

on the SMW. This only removes the tenant VM and its related changes to Urika-GX, it does not remove the tenant
configuration for the tenant VM. Use the 

ux-tenant-create

 command to recreate a deleted tenant. To remove

a tenant named 

myTenant

:

# 

ux-tenant-remove myTenant

If the tenant VM is running when the admin attempts to remove it, the removal will fail with an error indicating that
the VM is currently running. In this case, either stop the VM using 

ux-tenant-stop

 or add the 

--force

 option

to the 

ux-tenant-remove

 command as follows:

# 

ux-tenant-remove --force myTenant

Security

S3016 

 

 194

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands