Display danc status or set specified danc power on/off/cycle.
Syntax:
danc [status|on|off|cycle] [0|1|all]
Parameters:
status
Display status of specific dANC
on
Power on specific dANC
off
Power off specific dANC
cycle
Power cycle specific dANC
Example:
[r0s0i0 /]#
iscb danc
# PMDev Pwr +12V Watt Ver Stat dANC Ars0 Ars1 AOC0 AOC1 AOC2 AOC3 AOC4
0 LM25066 AA on 12.1 51.2 2 0000 30 38 39 0 0 0 0 0
1 LM25066 AA on 12.1 51.8 2 0000 30 38 38 0 0 0 0 0
ok
[r0s0i0 /]#
iscb danc status 0
danc#: 0
PM Dev: LM25066 AA
power: on
+12V: 12.1 V
Watt: 5.0 W
Ver: 2
stat: 0103h
htbeat: 59
dANC: 22 'C (55)
Aries0: 29 'C (85)
Aries1: 30 'C (85)
AOC0: 0 'C (-1)
AOC1: 0 'C (-1)
AOC2: 0 'C (-1)
AOC3: 0 'C (-1)
AOC4: 0 'C (-1)
ok
[r0s0i0 /]#
iscb danc cycle all
ok
[r0s0i0 /]#
fan
Display or set CFU fan speed duty. If there is no access of iSCB from outside over 90
seconds, iSCB will change to full speed automatically
Syntax:
fan [cfuno|all][high|normal|low]
Parameters:
cfuno
CFU number
all
All CFUs
high
Set to full speed. (100%)
normal
Set to normal speed. (85%)
low
Set to low speed. (60%)
Example:
[r0s0i0 /]#
iscb fan
CFU: 00 01 02 03 04 05
Status: ok ok ok ok ok ok
Fan1: 3468rpm 3470rpm 3501rpm 5405rpm 5510rpm 3486rpm
System Monitoring
S3016
109
