#
urika-start --limit nid00014
Start all the services on a few nodes.
#
urika-start --limit nid00014, nid00015
Start a particular service (HUE in this example) on all the nodes:
#
urika-start --service hue
Start a particular service (HUE in this example) on a particular node:
#
urika-start --service hue
urika-stop
The
urika-stop
command is used to stop analytic services running on one node, a number of nodes or on all
the Urika-GX system nodes. To specify more than one node, specify the node IDs separated by commas. To stop
a specific service, use the
-s
or
--service
option to specify the name of that service. This command stops all
the running analytic services if used without any options.
For more information, see the
urika-stop
man page.
Stop all the running services on all the nodes.
#
urika-stop
Stop all the running services on a particular node.
#
urika-stop --limit nid00014
Stop all the services on a few nodes.
#
urika-stop --limit nid00014, nid00015
Stop a particular service (Spark in this example) on all the nodes:
#
urika-stop --service spark
Stop a particular service (Spark in this example) on a particular node.
#
urika-stop --service spark
System Management
S3016
52
