4.15.2 iSCB Command Reference
Command List
bmc
Display the BMC status of specified node
bootmode
Display or set boot mode
cfu
Display information of all or specified CFUs
console
Display established cli connections or kill the specified connection
crash
Create a core dump?
danc
Display status and power on/off/cycle all or specified dANCs
fan
Display CFU status or set fan PWM duty value
fcb
Display power usage of CFU from Fan Control Board
help
Display available commands and usage
history
Display list of commands that were previously entered in the current CLI session
identify
Identify the node in the subrack by blinking the green/red LED and the node’s ID-LED
lasterr
Display recently occurred event log or clear the last log
led
Turn Off the green/red LED and the node’s ID-LED
log
Display event logs by specified log level: all, info, critical, and warning
node
Display status of all or specified nodes
nvram
Display or update the configuration parameters stored in NVRAM
pmled
Display powerman style ID-LED status
pmnode
Display powerman style power status
power
Power on/off/cycle/reset all nodes or specified node
profile
Display a profile of the specified device
psu
Display status, power consumption, and energy data of all or specified PSUs
psuclear
Reset the energy usage counter
psumodel
Display detailed model information and serial number of all PSUs
psumodelclea
r
Remove the serial numbers for the PSUs in the subrack
pump
Display pump sensor data from specified node
reboot
Reboot iSCB to apply modified parameter settings or to update firmware
restart
Restart the iSCB service
sendmail
Test sending an e-mail
sensor
Display temperature sensor data from all or specified nodes
set
Display or set iSCB parameters
System Monitoring
S3016
106
