manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 239

2. Stop the HiveServer2 service.

# urika-stop -s hive

3. Connect to a node where the HiveServer2 service is running.

4. Edit the 

/etc/hive/conf/hive-site.xml

 file and change the authentication mode from 

NONE

 to 

LDAP

<property>

 <name>hive.server2.authentication</name>

 <value>NONE</value>

</property>

CAUTION: Enabling LDAP authentication for HiveServer2 may result in misconfiguration of HUE, as
shown in the following figure. To resolve this issue, please follow the instructions documented at 

http://gethue.com

.

Figure 43. Error Message

5. Log on to the SMW.

6. Restart HiveServer2 service.

# urika-start -s hive

7.15 Enable SQL Standard based Authorization for HiveServer2

Prerequisites

This procedure requires root privileges.

About this task

SQL standard based authentication for connecting to HiverServer2 is not enabled by default on Urika-GX. Follow
the instructions in this procedure to enable it.

Procedure

1. Log on to the SMW as root.

Security

S3016 

 

 239

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands