manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 221

7.9.2

Change the Default Nagios Password

Prerequisites

This procedure requires root privileges.

About this task

The default credentials for login on to the Nagios UI on the Urika-GX system are:

●

User name: 

crayadm

●

Password: 

initial0

Procedure

1. Log on to the SMW as root.

# 

ssh root@machine-smw

2. Stop the HTTPD service if it is running.

# 

service httpd stop

3. Stop the Nagios service if it is running.

# 

service nagios stop

4. Change the default Nagios password

# 

htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin

5. Start the HTTPD service.

# 

service httpd start

6. Start the Nagios service.

# 

service nagios start

7. Verify that the password has been changed by logging on with the new password to the Nagios UI, which is

located at 

http://

machine

-smw/nagios

7.9.3

Change the Default iDRAC8 Password

About this task

After accessing the iDRAC8's web interface, it is recommended to change the default password using the
following instructions:

Security

S3016 

 

 221

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands