version of the software, the system will return a message of the following form when the
ux-tenant-*
commands are executed:
The following configuration settings are no longer used
and can be removed from the Urika Tenant Management
configuration:
UXTENANT_GLOBAL_LDAP_DEFAULT_TENANT_USER_PASS
UXTENANT_GLOBAL_LDAP_GROUP_OU
Clean up all references to these to avoid seeing this
warning again.
Though this message is harmless, it can be prevented by locating the files containing the offending settings (all
settings have a key in them that identifies the type of file they come from:
●
UXTENANT_GLOBAL
settings come from
/etc/sysconfig/uxtenant/global
●
UXTENANT_TENANT
settings come from configuration files in
/etc/sysconfig/uxtenant/tenants
●
UXTENANT_HOST
settings come from files in
/etc/sysconfig/uxtenant/hosts
●
UXTENANT_MOUNT
settings come from files in
/etc/sysconfig/uxtenant/mounts
Edit all the affected files and remove the listed configuration settings and the comments at the end of the file. Also
remove the
UXTENANT_UNUSED_SETTINGS
setting at the very end of the file containing the list of outdated
settings.
Along the same lines, the system may return the following message:
ux-tenant-list-users(error): configuration is out of date with the current
version
The following configuration files need to be brought
up to date with the current version of Urika Tenant
Management. These need to be fixed before tenant
management can proceed:
tenants/default
Fix all of these files before trying this command again
This indicates that some set of configuration files are out of date.
ux-tenant-*
commands cannot be executed
until the configuration is brought up to date by adding the required settings, which are listed as a comment in each
of the affected files. Edit the file to put the setting in place. Use the
ux-tenant-config(5)
man page to
determine the values for new settings.
Similarly, the system may return the following message:
The following configuration settings are new with the
current version of Urika Tenant Management and need to
be set up correctly before tenant management can proceed:
UXTENANT_TENANT_IP_DNS1
UXTENANT_TENANT_IP_DNS2
UXTENANT_TENANT_IP_DOMAIN
UXTENANT_TENANT_IP_GATEWAY
Fix all references to these before trying this command again
This will indicate the configuration settings that need to be brought up to date. Edit the affected files and set up
the missing configuration, then remove the comments and the
UXTENANT_NEW_SETTINGS
setting at the end of
the file(s). After that, re-run the failing command.
Troubleshooting
S3016
252
