manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 216

WARNING: Stopping and starting the Mesos cluster will cause running jobs within the cluster to
terminate. This should only be done during a suitable maintenance interval or when the Mesos cluster is
quiescent to avoid job failure.

7.8

Authentication Mechanisms

Table 23. Authentication Mechanisms

Application

Authentication Mechanism

Cray Application Management UI

LDAP. Users can also log in with the default account
shipped with the system. This account has the following
credentials:

username: 

admin

password: 

admin

Urika-GX Applications Interface

Not available.

Documentation and Learning Resources UI

Not available.

Grafana UI

LDAP. The system also ships with a default account that
can be used to log on to Grafana. The credentials of this
account are:

username: 

admin

password: 

admin

Jupyter Notebook UI

LDAP. The system also ships with a default account that
can be used to log on to Jupyter. The credentials of this
account are:

username: 

crayadm

password: 

initial0

HUE UI

LDAP. The system also ships with a default admin
account that can be used to log on to HUE. The
credentials of this account are:

username: 

admin

password: 

initial0

Hadoop/Spark related UIs, such as Spark History
Server, Hadoop History Server, YARN Resource
Manager, etc.

Not available

Marathon UI

Not available.

Mesos UI

User name: LDAP user name

Security

S3016 

 

 216

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands