manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 263

Error Message

Description

Resolution

Looks like there is some problem
with flex up. Please try urika-yam-
status or look at the logs to find the
problem

The job failed to launch.

Review logs (stored
at 

/var/log/urika-yam.log

 on

login nodes) or execute the urika-
yam-status command to identify if
there is any problem. Please check
if there are any issues related to
Mesos and/or Marathon. If the
Mesos and/or Marathon web UI
cannot be accessed, contact the
administrator, who should verify that
the Mesos and Marathon daemons
are up and running. If any of these
daemons are not running for some
reason, report the logs to Cray
Support and restart the Mesos
cluster using the 

urika-start

command. For more information,
see the 

urika-start

 man page.

Could not find the script urika-yam-
start-nodemanager in hdfs. Looks
like there is an error with your urika-
yam installation Please contact your
sysadmin

The 

urika-yam-start-

nodemanager

 script is a

component of the Cray developed
scripts for flexing up a YARN cluster
and is installed as part of the
installation of these flex scripts.

If this issue is encountered, the
administrator should verify that:

●

HDFS is in a healthy state

●

Marathon and Mesos services
are up and running.

The status of the aforementioned
services can be checked using the

urika-state

 command. For more

information, see the 

urika-state

man page. Contact support for
additional information about
resolving this issue.

INFO: can not flexup YAM in secure
mode

This message indicates that the
user is attempting to execute the

urika-yam-flexup

 script while

the system is in the secure service
mode, instead of in the default
mode.

The 

urika-yam-flexup

 script

can only be used in the secure
service mode. For more information,
refer to the Urika-GX System
Administration Guide.

INFO: can not flexdown YAM in
secure mode

This message indicates that the
user is attempting to execute the

urika-yam-flexdown

 script while

the system is in the secure service
mode, instead of in the default
mode.

The 

urika-yam-flexdown

 script

can only be used in the secure
service mode. For more information,
refer to the Urika-GX System
Administration Guide.

INFO: can not flexdown-all YAM in
secure mode

This message indicates that the
user is attempting to execute the

urika-yam-flexdown-all

 script

while the system is in the secure

The 

urika-yam-flexdown-

all

script can only be used in the

secure service mode. For more
information, refer to the Urika-GX
System Administration Guide.

Troubleshooting

S3016 

 

 263

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands